C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Barometric Pressure Sensor: Description and Operation
Boost (BARO) Sensor
Boost (BARO) Sensor
DESCRIPTION
The boost sensor measures the changes in the intake manifold pressure. The boost sensor converts engine load and speed changes, then converts
the change in readings to voltage output.
OPERATION
The PCM sends a 5 volt reference signal to the boost sensor. As the manifold pressure changes, the electrical resistance of the boost sensor also
changes. By monitoring the sensor output voltage, the PCM detects the boost pressure. A high pressure (high voltage) requires more fuel. A lower
pressure (low voltage) required less fuel. The control module uses the boost pressure signal to control fuel delivery.
The Boost sensor is also used for the Barometric Absolute Pressure (BARO) readings only on the vehicles that are not equipped with an EGR.
This sensor reads the barometric pressure (BARO) under certain conditions, which allows the PCM to automatically adjust for different altitudes.
