C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
5. Remove the fuel manager/filter by lifting straight up.
Description
6. Remove the sensor mounting screws.
Description
7. Remove the sensor.
INSTALLATION PROCEDURE
1. Install new water in fuel sensor and a new water in fuel sensor seal.
2. Instal the sensor mounting screws.
Tighten
-
Tighten the mounting screws to 2 Nm (13 lb. in).
3. Position the fuel manager/filter to the intake manifold.
4. Install the wiring harnesses and fuel hoses.
5. Install the mounting bolts that connect the fuel manager/filter to the intake manifold.
Tighten
