C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
6. Remove the fuel manager/filter by lifting straight up.
INSTALLATION PROCEDURE
1. Install the fuel hoses and wiring harnesses.
2. Position fuel manager/filter to intake manifold.
3. Install the wiring harnesses and fuel hoses.
4. Install the fuel manager/filter mounting bolts.
Tighten
-
Tighten the mounting bolts to 25 Nm (18 lb. ft).
5. Bleed air from fuel manager/filter. Refer to Bleeding Air from Fuel Supply System. See: Service and Repair
6. Install the upper intake manifold cover.
7. Install fuel tank filler cap
