C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position Sensor Replacement
WARNING: Failure to disconnect the negative battery terminal may result in personal injury or damage to the vehicle's components. Turn
OFF the vehicle Ignition, unless instructed otherwise.
REMOVAL PROCEDURE
^
Disconnect the negative battery cable under the following circumstances:
^
When installing an electrical unit.
^
When a tool or equipment could easily come into contact with "live" exposed electrical terminals.
1. Remove negative battery cable.
2. Disconnect the sensor electrical connector.
3. Remove the power steering pump. Refer to Power Steering Pump Removal.
4. Remove the sensor mounting bolt.
5. Remove the sensor from the engine.
