C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
2. Install the seat belt warning wire to the buckle assembly on the driver's side only.
3. Install the nut to the buckle assembly and onto the floor panel weld stud.
Tighten
^
Tighten the nut to 42 N.m (31 lb ft).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the cover assembly over the nut.
Description
5. Install the retractor and belt to the floor.
6. Install the bolt through the retractor into the floor panel weld nut.
Tighten
^
Tighten the bolt to 55 N.m (41 lb ft).
Description
7. Install the bolt through the anchor plate and washer into the door pillar weld nut.
Tighten
^
Tighten the bolt to 55 N.m (41 lb ft).
8. Install the cover over the door pillar anchor plate.
Extended Cab W/Bench Seat
