C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement (2WD (Except C3500HD)
REMOVAL PROCEDURE
1. Raise vehicle.
2. Remove tire and wheel.
3. Remove brake caliper.
4. Remove the hub and rotor.
5. Remove wheel speed sensor cable electrical connector.
6. Remove wheel speed sensor cable mounting clips (4) from frame attachment points.
7. Remove wheel speed sensor mounting bolts and nut.
8. Remove two 11 mm splash shield mounting bolts.
9. Remove wheel speed sensor and splash shield assembly.
10. Remove splash shield gasket.
11. Clean gasket and knuckle surfaces thoroughly with a dry cloth.
INSTALLATION PROCEDURE
1. Install splash shield gasket.
2. Install wheel speed sensor splash shield.
3. Install two 11 mm splash shield mounting bolts.
^
Tighten the splash shield mounting bolts to 16 Nm (12 ft. lbs.).
^
Tighten the speed sensor mounting bolts to 26 Nm (19 ft. lbs.).
4. Install harness clips (4), fastening bolts and nuts (5) to the frame attachment points.
5. Install the hub and rotor.
6. Install brake caliper.
7. Install tire and wheel.
