chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Neutral Safety Switch > < Wheel Speed Sensor Replacement (2WD (Except C3500HD)|Page 7497
Page 1
background image

Ignition Switch Lock Cylinder: Technical Service Bulletins
Ignition Lock Cylinder - Revised Replacement Procedure

File In Section: 02 - Steering 

Bulletin No.: 02-02-35-001

Date: January, 2002

SERVICE MANUAL UPDATE

Subject:
Revised Ignition Lock Cylinder Replacement

Models:
1998-2002 Chevrolet and GMC C/K, S/T, M/L and G Model Vehicles
1999-2000 Cadillac Escalade
2002 Cadillac Escalade
1998-2002 Oldsmobile Bravada

This bulletin is being issued to revise the Ignition Lock Cylinder Replacement procedure in the Steering Wheel and Column - Standard or Steering
Wheel and Column - Tilt sub-sections of the Service Manual. Please replace the current information in the Service Manual with the following
information.

The following information has been updated within SI2000. If you are using a paper version of this Service Manual, please make a reference to this
bulletin on the affected page.

The above mentioned Service Manuals omitted information regarding performing the Passlock Relearn or Autolearn procedure after an ignition lock
cylinder has been replaced. If you have replaced the ignition lock cylinder, refer to the following procedures:

For 1998-2000 model year vehicles, refer to Passlock Reprogramming in the Theft Deterrent subsection.

For 2001-2002 model year vehicles, refer to Programming Theft Deterrent System Components in the Theft Deterrent subsection.

DISCLAIMER

Neutral Safety Switch > < Wheel Speed Sensor Replacement (2WD (Except C3500HD)|Page 7497