C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
1. Inspect the front servo piston for porosity or damage.
2. Inspect the seal and seal ring groove for damage.
3. Inspect the piston pin for wear.
4. Inspect the spring for distortion.
5. Inspect the servo bore for wear or scoring.
6. Clean the all the components.
INSTALLATION PROCEDURE
1. Install a new seal onto the piston.
2. Install the front servo piston spring and the retainer.
3. Install the following parts:
3.1.
The ring
3.2.
The piston pin
3.3.
The piston (Ensure the tapered end of the piston pin contacts the band.)
4. Install the front servo assembly into the case.
