C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Shift Cable: Service and Repair
4L60-E Automatic Transmission
REMOVAL PROCEDURE
1. Position the steering column transmission shift lever to PARK (P).
2. Apply the parking brake.
3. Remove the front seat. Refer to Seats.
4. Remove the door sill trim plate. Refer to Door Sill Plate Replacement in Interior Trim.
5. Remove the hinge pillar trim panel. Refer to Hinge Pillar Trim Panel Replacement in Interior Trim.
6. Remove the carpet and the carpet retainers on the drivers side to expose the range select lever cable.
7. Remove the steering column filler panel from the steering column.
8. Disconnect the range select lever cable from the steering column shift control.
9. Disconnect the range select lever cable from the retainers on the cab floor pan.
10. Raise the vehicle. Support the vehicle with safety stands. Refer to Vehicle Lift Points,
