C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
13. Remove the TCC solenoid valve bolts.
14. Use the J28458 in order to remove the pass-through electrical connector from the transmission case.
Place the small end of the J28458 over the top of the connector.
Twist the J28458 in order to release the four tabs while pulling the harness connector from the transmission case.
15. Remove the TCC solenoid valve with the wiring harness from the transmission case.
INSTALLATION PROCEDURE
1. Install the TCC solenoid with the wiring harness to the transmission case.
2. Install the pass-through electrical connector to the transmission case.
3. Install the TCC solenoid bolts and screws.
4. Install the pressure control solenoid.
5. Install the pressure control solenoid retainer.
