C 1500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
1. Evaporator tube into clip.
2. New O-ring seal. Coat O-ring with 525 viscosity refrigerant oil.
3. Evaporator tube to condenser. Tighten evaporator tube to 24 Nm (18 ft. lbs.).
4. New O-ring seal. Coat O-ring with 525 viscosity refrigerant oil.
5. Evaporator tube to evaporator. Tighten evaporator tube to 24 Nm (18 ft. lbs.).
6. Coolant recovery reservoir.
7. Auxiliary heater pipe if equipped.
8. Negative battery cable.
9. Charge system.
10. Check system for leaks.
