chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Canister Control Valves - Revised Mounting Procedure|Page 2428 > < Canister Control Valves - Revised Mounting Procedure
Page 2
background image

Canister Control Valve

II.  1982-83 "B" or "G" and LG4/LM1 With 7K4 1982-83 "F" and -LG4 (refer to Sketch #1)

1.

Remove bolt which retains CCV bracket to alternator brace and discard.

2.

Remove two (2) screws which retain CCV to bracket. Discard bracket and screws.

3.

Remove clamp from bowl vent hose and purge TVS hose at CCV.

4.

Shorten bowl vent hose to 6-3/4" overall length.

5.

Shorten purge hose to 2-1/4" length from connector end.

Canister Control Valves - Revised Mounting Procedure|Page 2428 > < Canister Control Valves - Revised Mounting Procedure