C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
3. Install the bolt seals.
4. Install the new bolt boots.
5. Install the inboard lining.
6. Snap the retainer spring into the piston.
^
The pad retainer spring is already staked to the inboard shoe.
^
The pad must lay flat against the piston.
7. Install the outboard lining with the wear indicator at the leading edge of the pad during a front wheel rotation. The back of the pad must lay flat
against he caliper.
8. Install the caliper.