chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Park Brake Cable Replacement (Front Cable)|Page 8435 > < Park Brake Cable Replacement (Front Cable)|Page 8433
Page 3
background image

5. Connect the clip (5) and the bolt (4).

^

Tighten the bolt to 10 Nm (88 inch lbs.)

NOTICE: Refer to Fastener Notice in Service Precautions.

6. Connect the nut (6) and the clevis (5) to the park brake cable. Make sure the retaining fingers are tight.
7. Adjust the parking brake cable.
8. Lower the vehicle.

Park Brake Cable Replacement (Front Cable)|Page 8435 > < Park Brake Cable Replacement (Front Cable)|Page 8433