C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
5. Install the camshaft retainer and bolts in the engine block.
Tighten the bolts to 12 Nm (106 inch lbs.).
6. Use the J22101 to install the crankshaft sprocket.
7. Install the timing chain and camshaft sprocket to the camshaft.
8. Install the camshaft sprocket bolts to the camshaft.
Tighten the bolts to 30 Nm (22 ft. lbs.).
9. Install the crankshaft position reluctor ring on the crankshaft,
10. Install the engine front cover to the engine block.
11. Install the water pump to the engine block.