C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
NOTICE: Refer to Fastener Notice in Service Precautions.
Install the camshaft retaining bolts to the camshaft.
Tighten the retaining bolts to 12 Nm (106 inch lbs.)
3. Install the timing chain and sprocket to the camshaft.
4. Install the engine front cover to the engine block.
5. Install a new crankshaft position reluctor ring to the crankshaft.
6. Install the crankshaft balancer to the crankshaft.
7. Install the water pump to the engine block.
8. Install the lower fan shroud to the radiator.
9. Lower the vehicle.
10. Install the drive belt to the vehicle.
11. Install the upper fan shroud to the radiator.
12. Connect the battery negative cable to the battery.
13. Close the hood.
