C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Lifter / Lash Adjuster: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 9290-01 Valve Lifter Remover (Slide Hammer Type)
1. Open the hood.
2. Disconnect the negative battery cable from the battery.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
3. Remove the upper intake manifold from the lower intake manifold.
4. Remove the lower intake manifold from the cylinder head.
5. Remove the valve rocker arm from the cylinder head.
6. Remove the pushrod from the engine block.
7. Remove the intake manifold oil splash shield from the engine block.
8. Remove the valve lifter guide and retainer from the engine block.