C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Crankshaft Balancer: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 23523-F Crankshaft Balancer Puller and Installer
1. Open the hood.
2. Disconnect the battery negative cable from the battery.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
3. Remove the upper fan shroud from the radiator.
4. Remove the drive belt from the vehicle.
5. Raise the vehicle with safety stands.
6. Remove the lower fan shroud from the radiator.
7. Remove the crankshaft pulley from the crankshaft balancer.
