C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
INSTALLATION PROCEDURE
1. If servicing a C-model truck, install the engine mount assembly.
2. If servicing a K-model truck, install the engine mount assembly.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the engine mount assembly bolts, nuts, and washers.
-
Tighten the bolts to 59 Nm (44 ft. lbs.).
-
Tighten the nuts to 45 Nm (33 ft. lbs.).
4. Lower the engine until the engine mount through bolt can be inserted.
5. Install the engine mount through bolt and the nut.
Tighten the through bolt nut to 68 Nm (50 ft. lbs.).
6. Connect the battery negative cable.
