C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
2. Support the rear of the engine with a suitable engine stand, to relieve the weight on the rear mounts.
3. Remove the bolts and washers from the rear engine mount.
4. Remove the rear transmission bolts and washers.
5. Raise the rear of the engine only enough to permit removal of the mount.
6. Remove the mount.
4wd or 2wd with 15,000 GVW Models (Automatic Transmission)
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable from the battery.
NOTICE: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or the crankshaft pulley.
Due to the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump
screen. This will result in a damaged oil pickup unit.
2. Support the rear of the engine with a suitable engine stand, to relieve the weight on the rear mounts.
3. Remove the bolts and washers from the rear engine mount.
4. Raise the rear of the engine only enough to permit removal of the mount.
5. Remove the mount.
4wd or 2wd with 15,000 GVW Models (Manual Transmission)
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable from the battery.
NOTICE: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or the crankshaft pulley.
Due to the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump
screen. This will result in a damaged oil pickup unit.
