C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Tighten
-
Tighten to 25 Nm (18 lb. ft.).
4. Connect the throttle and cruise control cables.
5. Install the accelerator cable bracket and bolts.
6. Connect the IAC valve and TP sensor electrical connectors.
7. Install the air inlet duct and retaining nut.
Tighten
-
Tighten the nut to 2 Nm (18 lb. in.).
8. Connect the negative battery cable.
9. With the engine OFF, check to see that the accelerator pedal is free. Depress the pedal to the floor and release.
