chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Ignition Control Module > < Ignition Coil and ICM Replacement (HVS)|Page 6440
Page 2
background image

Tighten
Tighten the bolts to 27 N.m (22 lb in).

2. Connect the electrical connectors for the ignition coil and the ICM.

3. Relocate the engine wiring harness at the left rear side of the engine.
4. Install the air cleaner assembly.

Ignition Control Module > < Ignition Coil and ICM Replacement (HVS)|Page 6440