C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Description
1. Install the inflatable restraint front end discriminating sensor to the front end lower tie surface make sure the arrow is pointing toward the front of
the vehicle.
Description
2. Install the inflatable restraint front end discriminating sensor mounting fasteners.
Tighten
^
Tighten fasteners to 8 N.m (71 lb in).
NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.
Description
3. Connect the inflatable restraint front end discriminating sensor harness connector to the sensor.