C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Fog/Driving Lamp Switch: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Remove the negative battery cable.
2. Remove the IP cluster trim bezel.
3. Remove the fog lamp switch connector.
4. Remove the fog lamp switch from the bezel by pressing in on the two tabs on each side of the switch behind the bezel.
INSTALLATION PROCEDURE
1. Install the tog lamp switch to the bezel.