C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
2.4. The upper shock bolt (1)
2.5. The upper nut (3)
Tighten
Tighten the upper nut to 15 Nm (11 ft. lbs.).
