C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Spare Tire: Service and Repair
REMOVAL PROCEDURE
The spare tire mounting for the Suburban is at the left rear wheel well. The Suburban uses a mount that is part of the body.
1. Remove the spare tire.
1.1. Remove the nut.
1.2. Remove the adapter.
1.3. Remove the spare tire.
2. Remove the bolts from the support.
3. Remove the support from the vehicle.
INSTALLATION PROCEDURE
1. Install the support.
2. Install the bolts.
Tighten
Tighten the bolts to 5 Nm (44 inch lbs).
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
