C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Band Apply Servo: Service and Repair
4L60-E Automatic Transmission
REMOVAL PROCEDURE
-
Tools Required
-
J29714-A Servo Cover Depressor
1. Raise the vehicle. Refer to Vehicle Lift Points.
2. Lower the transmission if needed for clearance. Refer to Transmission Replacement.
3. Install the J29714-A.
4. Tighten the bolt in order to compress the servo cover.
5. Remove the servo cover retaining ring.
6. Remove the J29714-A.
7. Remove the servo cover and the O-ring seal. If the servo cover seems to be hung up on the seal, cut and remove the O-ring seal before removing
the cover.
8. Remove the 2-4 servo assembly.
DISASSEMBLY PROCEDURE
-
Tools Required
-
J22269-01 Piston Remover