C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
Case: Service and Repair
Breather
REMOVAL PROCEDURE
1. Remove the vent hose bolt and the clamp.
2. Remove the strap securing the vent hose to the transmission and the wiring harness.
3. Remove the vent hose from the transmission vent.
INSTALLATION PROCEDURE
1. Install the vent hose to the transmission.
2. Install the strap securing the vent hose to the transmission and the wiring harness.
3. Install the bolt and the clamp.
-
Tighten the bolt securing the clip and the vent hose to the transmission to 10 Nm (89 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.