C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
9. Remove the fluid filter and the seal. The seal may stick in the transmission case.
10. Inspect the fluid color.
11. Inspect the filter. Pry the metal crimping away from the top of the filter and pull apart. The filter may contain the following evidence for root cause
diagnosis:
-
Clutch material
-
Bronze slivers indicating bushing wear
-
Steel particles
12. Clean the transmission case and the oil pan gasket surfaces with solvent, and air dry. You must remove all traces of the old gasket material.
INSTALLATION PROCEDURE
-
Tools Required
-
J36850 Transmission Assembly Lube
1. Coat the new filter neck seal with a small amount of J36850, or equivalent.
2. Install the new filter neck seal into the transmission case. Tap the seal into place using a suitable size socket.
3. Install the new filter into the case.