C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
metal core adjust body, and the white lock button with soap and water. If the travel of the metal core adjust body remains restricted after the
cleaning, replace the cable assembly. Refer to Shift Cable Replacement
8. Remove the safety stands.
9. Lower the vehicle.
10. Ensure that the parking brake is applied.
11. Turn ON the ignition switch.
12. Move the transmission shift lever from PARK (P) to 1 and back to PARK (P) ten times.
13. Place the steering column transmission shift lever in the Park (P) position.
14. Turn the ignition switch to the OFF position.
15. Raise the vehicle. Support the vehicle with safety stands.
16. Position the transmission range select lever to PARK (P). Rotate the range select lever clockwise until it reaches the mechanical stop position.
