C 2500 Suburban 2WD V8-454 7.4L VIN J SFI (1998)
1. Install the manual valve link and the control valve body to the transmission case.
2. Install the remaining control valve body bolts.
-
Tighten the bolts to 11 Nm (8 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the manual shift detent spring assembly.
4. Install the manual shift detent spring bolt.
5. Install the O-ring, torque converter clutch solenoid, and retainer clip.
6. Install the wiring harness and bolts.
-
Tighten the bolts to 11 Nm (8 ft. lbs.).