C 2500 Suburban 2WD V8-6.0L VIN U (2002)
2. Connect the electrical connector.
3. Install the panel assembly to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the panel assembly screws (1,2).
Tighten the panel assembly screws (1,2) to 7 N.m (62 lb in).
5. Inspect the operation.
6. Install the rear compartment cover assembly.
Panel Replacement - Removable Rear - Mid Gate
REMOVAL PROCEDURE
1. Fold the rear seat back down.
2. Remove the hinges.
3. Open the midgate while leaving the back glass in place.
4. Remove the panel from the vehicle
INSTALLATION PROCEDURE