C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
Heater Case (1 OF 2)
Heater Case (2 OF 2)
Install or Connect
1. Heater core into retainer.
-
Install seven screws that hold heater cover to heater case.
2. Heater cover.
-
Make sure heater cover is properly sealed.
3. Heater case.
-
May be necessary to have an assistant when installing heater case.
4. Nuts.
5. Screws.
6. Screws
Tighten
-
Screws on engine side of the cowl to 1.9 Nm (17 lb in).
-
Nuts to 2.8 Nm (25 lb in).
-
Screw on interior side of the cowl to 11 Nm (97 lb in).
7. Heater hoses.
8. Coolant recovery reservoir.
9. Roll instrument panel forward.
10. Steering column.
11. Blower motor.
12. Blower motor cover.
13. Hinge pillar trim panels.
14. Center floor air distribution duct.
15. Electrical connectors, as necessary.
16. Instrument panel storage compartment.
17. Engine coolant.
-
Check the system for leaks.
