C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
Air Door Cable: Service and Repair
Defrost Control Cable
Remove or Disconnect
1. Instrument cluster trim plate.
2. Control assembly.
3. Electrical connector.
4. Defrost cable from the control assembly.
5. Defrost cable from the defroster valve.
Install or Connect
1. Index the cable before installing.
A. Cycle the mode rotary knob to "HEATER."
B. Make sure the defrost door is closed.
2. Cable to the defrost valve.
A. Snap the cable onto the valve.
B. Secure the cable by snapping the cable into the heater case.
3. Defrost cable to the control assembly.
-
Route the cable in the same location as removed.
4. Electrical connector.
5. Control assembly.
6. Instrument cluster trim plate.
