chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Door Switch - Dome Light Stays On/Dead Battery/No Start|Page 10860 > < IP Dimmer Control - Proper Setting|Page 10851
Page 1
background image

Dome Lamp: Customer Interest
Door Switch - Dome Light Stays On/Dead Battery/No Start

File In Section: 8 - Chassis/Body Electrical 

Bulletin No.: 56-82-05

Date: September, 1995

Subject: 
Dome Lamp Stays On, Dead Battery, No Start (Shim Door Trim Panel Push Nail)

Models: 
1995 Chevrolet and GMC Truck C/K Models
1995 Topkick/Kodiak Models

Condition

Dome lamp stays on, with doors closed and headlight rotary wheel in the off position.

Cause

Dome lamp switch plunger is not pushed in far enough. There is too large a gap between the dome lamp switch plunger and the door panel convex push
nail.

Correction

Shim out door panel push nail with color keyed shims available through GMSPO.

Service Procedure

Door Switch - Dome Light Stays On/Dead Battery/No Start|Page 10860 > < IP Dimmer Control - Proper Setting|Page 10851