C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
Fig. 9 Cast Iron Reservoir Bleeder Adapter Installation
A diaphragm type pressure bleeder must be used. It must have a rubber diaphragm between the air supply and the brake fluid to prevent air, moisture, oil,
and other contaminants from entering the hydraulic system. Also, adapters are needed depending on the type of master cylinder reservoir used on the
vehicle:
Brake Bleeder Adapter (Plastic Reservoir) tool No. J 29567, or equivalent, Fig.8.
Brake Bleeder Adapter (Cast Iron Reservoir) tool No. J 23518-01, or equivalent, Fig. 9.
