C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
Fuel/Water Separator: Service and Repair
Fuel Manager/Filter
REMOVE OR DISCONNECT
1. Open air bleed valve on top of the fuel manager/filter to release any pressure in the fuel supply system.
2. Mounting bolts that connect the fuel manager/filter to the intake manifold and move the fuel manager/filter to a position that enables access to the
sensor mounting screws.
3. Sensor wiring harness.
4. Sensor mounting screws.
INSTALL OR CONNECT
1. New water sensor and a new water sensor seal.
Tighten
-
Screws to 2 Nm (13 lb. in.).
