C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
Glow Plug: Service and Repair
Left Side
REMOVE AND DISCONNECT
1. Negative battery cable.
2. Glow plug lead wires from the glow plugs, using J 39083 glow plug connector remover and installer.
3. Glow plugs from the engine.
^
Use a 3/8 inch deep-well socket to remove the plugs.
INSTALL OR CONNECT
1.
Glow plugs.
Tighten
^
Glow plugs to 23 Nm (17 lb. ft.).
2. Lead wires to the glow plugs.
3. Negative battery cable.
