C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
Impact Sensor: Service and Repair
Arming Sensor
Prior to performing replacement procedures, disarm air bag system. Refer to, Service and Repair/ Air Bag System Disarming & Air Bag
System Arming. Refer to, / Specifications/ Mechanical for torque values when installing components.
All sensors and mounting bracket bolts must be carefully torqued to assure proper operation. Never power up the air bag system when any
sensor is not rigidly attached to the vehicle, since the sensor could be activated when not attached, causing air bag deployment.
1. disconnect sensor electrical connector from retainer, remove Connector Position Assurance (CPA) lock from connector, then disconnect
connector.
2. Remove sensor mounting bolts and sensor from vehicle.
3. Reverse procedure to install.
