C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
6.
Relocate the plastic cover back to its original position and fasten plastic cover to the webbing with a new cover retaining button (Figure 6). Push
button through the hole created by the staple. If necessary, use a small pointed punch to create a hole in the cover opposite the staple hole.
7.
Install Campaign Identification Label.
Campaign Identification Label/Claim Information
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. When installing the new Campaign Identification Label, be sure to install the clear protective covering. Additional
Campaign Identification Labels can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday-Friday, 8:00 a.m. to 4:30 p.m. EST).
Ask for Item Number S-1015 when ordering.
Apply "Campaign Identification Label" only on a clean, dry surface.
