C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1995)
Torque Sequence, Control Valve And Switch Assembly
INSTALL OR CONNECT
1. Install checkballs (54) in proper location into case fluid passages. Use TRANSJEL TM J 36850 or equivalent to hold in place.
NOTICE: Do not use any type of grease to retain parts during assembly of this unit. Greases other than the recommended assembly lube will change
transmission fluid characteristics and cause undesirable shift conditions and/or filter clogging.
-
# 2 checkball is used only on RCP RDP, ZJP and ZLP models.
2. PWM solenoid screen (75).
