C 2500 Suburban 2WD V8-8.1L VIN G (2001)
1. Connect the control rod to the inside door handle.
2. Slide the handle into place.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the inside door handle retaining bolts.
Tighten
Tighten the door handle retaining bolts to 9 N.m (80 lb in).
4. Install the trim panel.
Door Inside Handle Replacement
Door Inside Handle Replacement
Tools Required
J 34940 Rivet Gun
Removal Procedure
1. Remove the trim panel.
2. Remove the water deflector.