C 2500 Suburban 2WD V8-8.1L VIN G (2001)
1. Install the lower rear quarter trim panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower rear quarter trim panel screws.
Tighten the screws to 6 N.m (53 lb in).
3. Install the pocket to the lower panel, if equipped.
Rear Quarter Trim Panel Replacement
Rear Quarter Trim Panel Replacement
Removal Procedure
1. Remove the coat hook.
2. Remove the seat belt.
3. Remove the jack cover, the jack, and the jack tray on the right side.
4. Remove the rear window lower garnish molding.
5. Remove the quarter panel trim screws.
6. Remove the rear screws from the sill trim plate.
7. Remove the quarter trim panel.
Installation Procedure
