C 2500 Suburban 2WD V8-8.1L VIN G (2001)
1. Install the quarter trim panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the panel screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install the rear screws into the sill trim plate.
4. Install the rear window lower garnish molding. Rear Window Lower Garnish Molding Replacement.
5. Install the jack tray, the jack, and the cover on the right side. Jack and Tool Stowage Replacement (Pickup and Crew Cab) in Trunk/Liftgate.
6. Install the seat belt.
7. Install the coat hook.
Rear Window Lower Garnish Molding Replacement
Rear Window Lower Garnish Molding Replacement
Removal Procedure
1. Carefully pull the lower edge of the molding in order to release the four clips.
2. Lift the molding up and away from the glass in order to release the upper retainers.
Installation Procedure
