C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster Replacement
Removal Procedure
1. Apply the parking brake.
2. Remove the brake master cylinder.
3. Remove the vacuum hose at the booster.
4. Disconnect the electrical connection from the stoplamp switch. Remove the pushrod retaining clip (4).
5. Remove the stoplamp switch (2).
6. Remove the pushrod (3) from the brake pedal stud (1).
7. Remove the vacuum booster mounting nuts.
8. Remove the vacuum booster.
