C 2500 Suburban 2WD V8-8.1L VIN G (2001)
9. Remove the gasket from the booster and discard.
Installation Procedure
1. Install the gasket to the booster
2. Install the vacuum booster.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the vacuum booster mounting nuts.
^
Tighten the nuts to 36 Nm (27 ft. lbs.).
4. Install the pushrod (3) to the brake pedal stud (1).
5. Install the stoplamp switch (2).
6. Connect the electrical connection to the stop lamp switch.
7. Install the vacuum hose at the booster.
