C 2500 Suburban 2WD V8-8.1L VIN G (2001)
10. Install a new O-ring sea] to the heater pipe.
11. Install the heater pipe to the thermostat housing crossover.
12. Install the bolt retaining the heater pipe to the thermostat housing crossover.
^
Tighten the heater pipe bolt to 21 Nm (15 ft. lbs.).
13. Install the bolt retaining the heater pipe to the fuel filter assembly.
^
Tighten the heater pipe bracket bolt to 21 Nm (15 ft. lbs.).
14. Install the generator mounting bracket and bolts.
^
Tighten the generator mounting bracket bolts to 50 Nm (37 ft. lbs.).
15. Install the ribbed idler pulley and the bolt.
^
Tighten the idler puller bolt to 43 Nm (32 ft. lbs.)..
16. Install the heater outlet hose bracket bolt.
^
Tighten the bracket bolt to 21 Nm (15 ft. lbs.).
17. Install the nuts retaining the fuel bleed valve and PCV oil separator bracket from the generator mounting bracket.