C 2500 Suburban 2WD V8-8.1L VIN G (2001)
18. If equipped with a 6.0L or 8.1L engine, install the exhaust muffler nuts.
19. Tighten the exhaust pipe clamp bolt.
^
Tighten the exhaust muffler nuts to 40 Nm (30 ft. lbs.).
^
Tighten the exhaust pipe clamp to 40 Nm (30 ft. lbs.).
20. If equipped with a 6.0L engine, perform the following:
^
Connect the oxygen sensor electrical connector.
^
Connect the CPA retainer.
^
Clip the oxygen sensor connector to the frame.
21. If equipped with a 6.0L or 8.1L engine, perform the following:
^
Connect the oxygen sensor electrical connector.
^
Connect the CPA retainer.
^
Clip the oxygen sensor connector to the support.