C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Heat Only
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) bezel. Refer to Bezel Replacement - IP Cluster in Instrument Panel, Gauges and Console.
2. Remove the radio.
3. Remove the HVAC control assembly by firmly depressing and holding the retaining tabs. Slide the assembly forward.
4. Disconnect the temperature and the mode cables from the back of the HVAC control assembly.
5. Disconnect the electrical connection from the HVAC control assembly.
6. Remove the HVAC control assembly.
INSTALLATION PROCEDURE
