C 2500 Suburban 2WD V8-8.1L VIN G (2001)
1. Install the A/C compressor hose assembly to the vehicle.
2. Connect the A/C recirculation switch electrical connector to the A/C compressor hose assembly.
3. Connect the A/C compressor hose assembly to the condenser using new sealing washers.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the nut at the condenser.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
5. Install the upper radiator baffle.Refer to Radiator Air Baffle Assemblies and Deflectors (Side) or Radiator Air Baffle Assemblies and Deflectors
(Upper) in Cooling System.